Flat Roof Restoration Photo Galleries
Tan Tinted Ure-A-Sil System Over Granulated Modbit Roof
Our urethane – silicone combo roof coating system effectively restored the aged modified bitumen roof at this healthcare facility. The tan tint was chosen for this job to match the building and more importantly, reduce potential glare.
The smooth built-up roof on this shopping center was leaking to the point of a complete tear-off/replacement if not restored immediately. Our combination urethane – silicone roof coating system was the best solution. The American WeatherStar Approved Contractor was able to save the building owner 50% by restoring the roof before replacement was needed.
Single-Ply Roof Installed Over Tar & Gravel Roof
A tar and gravel roof is always a challenge for an effective roof coating system. In this case, the American WeatherStar Approved Contractor chose to install our single-ply system over the existing roof.
Ure-A-Sil System Over Granulated Modbit
This project was one of the first installations of the Ure-A-Sil roof coating system. The school board specified an acrylic coating for the job, but after learning that an acrylic coating would not solve the problems they were having with ponding water, they chose the urethane – silicone combo system.
FoamGard Over Granulated Modbit
The deteriorating mod bit roof on this facility was not only at risk of failure, the building was in need of an improved insulation value. The American WeatherStar Approved Contractor chose the FoamGard system, which consisted on 1″ of spray polyurethane foam for insulation topped with 2 coats of our 100% acrylic 211 to protect the foam from UV damage.