Acrylic Brush-Grade 220
Acrylic Brush-Grade 220 is a water-based, high solids elastomeric sealant utilizing the latest advances in acrylic roof coatings technology. Acrylic Brush-Grade 220 is manufactured from a unique acrylic resin specifically designed to provide increased tensile strength and elongation.
- Excellent adhesion to multiple substrates
- Reflects 80-90% of heat caused harmful UV rays
- Easy to use, easy to clean up, and non-toxic
- Reduces daily expansion and contraction (thermal cycling) of roofing substrate
- VOC compliant and resistant to dirt pick-up
5-gallon pail, 2-gallon pail
Acrylic Brush-Grade 220 is ideally suited for sealing mechanical fasteners and vertical seams on metal roofs, as well as around flashings, drains and penetrations on most roof surfaces. Acrylic Brush-Grade 220 has excellent adhesion to asphaltic roofing, metal, concrete, wood, and polyurethane.Download Product Data SheetDownload Safety Data Sheet
- Modified Bitumen
- Smooth BUR
All surfaces to be coated must be clean, dry, and paintable. It may be necessary to power wash and/or prime to enhance adhesion. See application specification for more details.
All surfaces to be coated must be cleaned properly. Power washing is recommended. Any existing coating must be checked for good adhesion. Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility. Acrylic Brush-Grade 220 is a ready-to-use product. Thinning is not required or recommended.
Acrylic Brush-Grade 220 is designed for positive drainage. Areas of ponding water must be addressed before product is applied.
|Application||Coverage (1 gallon)||Width||Wet Mils||Average Dry Mils|
|Seams||75 linear ft.||4″||48||30|
|Flashing Details||33 linear ft.||6″||76||50|
*Coverage rates listed are estimates based on typical conditions.
- Bulk Gun
- FM Approved
- Miami-Dade County
- ENERGY STAR
- Florida Product Approval