Acrylic Skylight Sealer 230

Acrylic Skylight Sealer 230 is a translucent, elastomeric coating used to treat fiberglass skylight panels. This product provides a durable, weather-resistant finish that helps the panel maintain its translucent properties.

  • Extremely tough, durable, UV resistant sealant
  • Excellent water resistance
  • Good bridging qualities over small cracks and openings
  • Outstanding resistance to dirt collection and pollutants
  • Environmentally safe

5-gallon pail



Acrylic Skylight Sealer 230 is used with the American Weatherstar metal roof coating systems to help seal and recondition fiberglass skylight panels. Note, if the skylights panels are cracked, Acrylic Skylight Sealer 230 is not a sufficient solution and the skylight panel should be replaced.

Download Product Data SheetDownload Safety Data Sheet
  • Metal
Surface Prep:

All surfaces to be coated must be clean, dry, and paintable. It may be necessary to power wash and/or prime to enhance adhesion. See application specification for more details.


All surfaces to be coated must be cleaned properly. Power washing is recommended. Any existing coating must be checked for good adhesion. Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility. Acrylic Skylight Sealer 230 is a ready-to-use product. Thinning is not required or recommended.


Acrylic Skylight Sealer 230 is designed for positive drainage. Areas of ponding water must be addressed before product is applied.

  • Brush
  • Roller
  • FM Approved
  • CRRC
  • Miami-Dade County
  • Florida Product Approval
  • UL

Related Products