High Tensile Acrylic 211
High Tensile Acrylic 211 is a technologically advanced, high solids, elastomeric coating formulated with high tensile strength and elongation properties. This product is the best acrylic coating for color retention on custom tint projects. High Tensile Acrylic 211 provides an excellent protective membrane that remains flexible even under adverse conditions.
- Excellent adhesion to multiple substrates
- Reflects 80-90% of heat caused harmful UV rays
- Easy to use, easy to clean up, and resistant to dirt pick-up
- Reduces daily expansion and contraction (thermal cycling) of roofing substrate
- Non-toxic and VOC compliant
55-gallon drum, 5-gallon pail
High Tensile Acrylic 211 is specifically developed as a protective coating for spray polyurethane foam, metal, modified bitumen, smooth BUR, and most single-ply roofs. The thixotropic nature of High Tensile Acrylic 211 permits uniform, high-build coverage, even on rough, textured, and vertical surfaces without pin-holing or sagging. Ponding water conditions should be avoided, if possible, as with any type of roofing material.Download Product Data SheetDownload Safety Data Sheet
- Modified Bitumen
- Smooth BUR
All surfaces to be coated must be clean, dry, and paintable. It may be necessary to power wash and/or prime to enhance adhesion. See application specification for more details.
All surfaces to be coated must be cleaned properly. Power washing is recommended. Any existing coating must be checked for good adhesion. Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility. High Tensile Acrylic 211 is a ready-to-use product. Thinning is not required or recommended.
High Tensile Acrylic 211 is designed for positive drainage. Areas of ponding water must be addressed before any coatings are applied.High Tensile Acrylic 211 Spray Guide
- Tank Spreader
- Airless Sprayer
- FM Approved
- Miami-Dade County
- ENERGY STAR
- Florida Product Approval