Silicone 410 is a ready-to use, high solids, single-component, solvent-borne, moisture-cure fluid applied silicone coating. Silicone 410 forms a weather-resistant, rubber-like seal that can withstand ponding water conditions and provide unsurpassed protection from harmful UV rays.
- Superior durability
- Excellent UV protection
- Superior adhesive and cohesive strength
- Able to withstand ponding water
- Excellent reflectivity
55-gallon drum, 5-gallon pail
Silicone 410 provides elemental protection for architectural surfaces such as vertical walls, masonry, concrete, metal, single-ply roof membranes, and sprayed-in-place polyurethane foam systems.Download Product Data SheetDownload Safety Data Sheet
- Modified Bitumen
- Smooth BUR
Mix before application to ensure uniform color and consistency.
All surfaces to be coated must be clean, dry, and paintable. It may be necessary to power wash and/or prime to enhance adhesion. See application specification for more details.
This product may be applied directly to any clean, dry surface. Polyurethane foam should be coated within 24 hours of application. Apply by spray, brush, or roller as received. No thinning or reducing is necessary. Subsequent coats should be applied within 24 hours of prior applications to insure full and uniform adhesion.
It is not recommended that this product be applied at temperatures below 50°F. (10°C.), or if rain is expected within 1 hours of application. Silicone 410 may be applied at lower temperatures, however the cure time will be extended.
Due to the combustible nature of this product, do not use an electric mixer. Silicone 410 contains combustible solvents. Keep away from heat, sparks and open flame. Avoid prolonged breathing of vapors and prolonged or repeated skin contact. Use only with adequate ventilation.Silicone 410 Spray Guide
- Tank Spreader
- Airless Sprayer
- FM Approved
- Miami-Dade County
- ENERGY STAR
- Florida Product Approval