Aliphatic Urethane 510

Aliphatic Urethane 510 is a technologically advanced, high-solids, single-component, moisture-cure polyurethane elastomer coating. Once cured, this fluid-applied polymer provides a durable, seamless, and flexible membrane that will allow for normal expansion and contraction. Aliphatic Urethane 510 provides superior UV protection and offers increased resistance to moisture penetration through its lower moisture vapor permeability values.

  • Extremely durable and resistant to dirt pick-up
  • Reduces daily expansion and contraction (thermal cycling) of roofing substrate
  • Superior adhesive and cohesive strength
  • Excellent elongation and tensile strength
  • Superior UV protection and reflectivity

55-gallon drum, 5-gallon pail


Bright white

Aliphatic Urethane 510 was specifically developed as a bright white protective top coat for sprayed-in-place polyurethane foam roofing and single-ply membrane systems. With excellent adhesion, Aliphatic Urethane 510 may be used for protection of conventional roof systems such as: EPDM, TPO, PVC, single-ply membranes, and asphalt-based systems.

Download Product Data SheetDownload Safety Data Sheet
  • Modified Bitumen
  • Metal
  • Single-ply
  • Smooth BUR
  • SPF
Surface Prep:

All surfaces to be coated must be cleaned properly. Power washing is recommended. Any existing coating must be checked for good adhesion. Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility.


Apply Aliphatic Urethane 510 to clean, dry, sound surfaces free of loose particles or other foreign matter. Successive and/or top coats MUST be applied to the base or intermediate coats within 48 hours to insure proper adhesion. Do not apply if ambient temperature falls below 50° F. If the results being obtained are less than desirable, suspend product application and contact our technical services personnel immediately.


Avoid moisture contamination in sealed containers. Store in a dry environment at temperatures between 40°F – 100°F. Keep away from heat, open flames, or sparks. Use only in well ventilated areas with proper protective equipment. Avoid breathing vapor or mist.

  • Tank Spreader
  • Airless Sprayer
  • Roller
  • FM Approved
  • Miami-Dade County
  • Florida Product Approval

Related Products