Silicone Walk Path 415

Silicone Walk Path 415 is a one-component, moisture cure silicone rubber coating system designed to enhance the impact resistance of the roof surface and also provide a non-skid walking surface when used with Walk Path Granules 1100.

  • Moisture cure
  • Able to withstand ponding water
  • Excellent UV protection and reflectivity
  • Superior adhesive and cohesive strength

5-gallon pail


OSHA Yellow

Silicone Walk Path 415 is used with Walk Path Granules 1100 to build a protective walkway on roof surfaces including: Modified Bitumen, Spray Polyurethane Foam, Concrete, EPDM, and other single-ply roofs.

Download Product Data SheetDownload Safety Data Sheet
  • Modified Bitumen
  • EPDM
  • Single-ply
  • Smooth BUR
  • Concrete
  • SPF

Surfaces to be coated with Silicone Walk Path 415 must be properly prepared. All surfaces must be clean, dry and free of loose particles. The coating should be applied by medium nap roller. For small touch-up work, a brush may be used. Recommended application rates are as follows:


Walkway Areas: 25 mils (1.65gal/sq.) of Silicone Walk Path 415 with 40 lbs./sq. of Walk Path Granules 1100.

Impact Resistant Areas: 40 mils (2.65 gal/sq.) of Silicone Walk Path 415 with 60 lbs/sq. of Walk Path Granules 1100.


Walk Path Granules 1100 will settle into the Silicone Walk Path 415 coating. Apply the granules generously and, within a few minutes, inspect the surface and re-apply as needed to obtain a continuous film of granules.

  • Tank Spreader
  • Airless Sprayer
  • Roller
  • FM Approved
  • CRRC
  • Miami-Dade County
  • Florida Product Approval
  • UL

Related Products