Clear Prime 9000™
Designed to enhance adhesion and efficiency, Clear Prime 9000 is a fast-drying, water-based sealer for concrete and masonry surfaces. Its low-VOC formula reduces topcoat absorption, maximizing protection and minimizing material usage for cost-effective performance.
- Enhances adhesion to concrete and masonry surfaces
- Helps reduce top coat absorption for improved coverage and protection
- Creates an effective sealing layer for porous substrates
- Rapid-drying, water-based formulation for efficient application
- Compatible with a wide range of top coat systems
- Helps maximize top coat performance and material efficiency
- Low-VOC technology compliant with most VOC regulations
- Easy-to-apply formulation with simple clean up
- Solids by Volume
- 25% ± 2%
- Weight per Gallon
- 8.6 lbs per gallon ± 0.2
- VOC Content
- 100 g/liter
- Dry Time
- 1–4 hours
- Service Temperature
- -40° to 200°F
- Clean Up
- Water
- Modified bitumen
- Metal
- TPO
- PVC
- EPDM
- Spray polyurethane foam
- Smooth built-up roofing
- Concrete
- Surface Preparation
Ensure the surface is clean, dry, and free of contaminants. Pressure wash (2,500–3,500 psi) if necessary. Some substrates may require mechanical abrasion for better adhesion.
- Mixing/Thinning
Stir thoroughly before use. Do not thin unless specified in product instructions.
- Application Methods
Apply using a brush, roller, or airless sprayer in a thin, even coat. Avoid pooling or over-application.
- Dry Time
Allow to dry completely before applying the topcoat. Dry time varies with temperature, humidity, and substrate but is typically 30 minutes to a few hours.
- Limitations/Precautions
Do not apply below 50°F. Avoid application if rain is imminent, as water-based primers can wash off before drying. Confirm compatibility with the intended coating system.
- Storage/Handling
Store in a cool, dry place, away from freezing temperatures. Keep containers sealed to prevent contamination.
- Cleanup/Disposal
Clean tools and equipment with soap and water immediately after use. Do not dispose of liquid primer in drains or waterways. Follow local regulations for disposal.
