EcoCleaner 925™
Engineered for high-performance cleaning, EcoCleaner 925 is an environmentally friendly, biodegradable solution that meets all US VOC regulations. Its low-foaming formula contains significant renewable content and effectively removes dirt, grease, paint, and adhesives when used at full strength.
- Biodegradable, environmentally friendly cleaning formulation
- Meets all U.S. VOC regulations, including SCAQMD requirements
- Low-foaming cleaner for efficient surface preparation
- Effective on roofs, concrete, steel, and other exterior surfaces
- Removes dirt, stains, paints, and adhesives with powerful cleaning action
- Features renewable-content ingredients for reduced environmental impact
- Can be diluted for general cleaning or used full strength for tougher contaminants
- Helps improve coating adhesion through proper surface preparation
- Compatible with pressure washing application methods
- Weight per Gallon
- 8.3 lbs./gal, ASTM 1475
- Flash Point
- > 212°F, ASTM D 1310
- VOC Content
- 0 grams/liter, ASTM D Method 24
- Modified bitumen
- Metal
- TPO
- PVC
- EPDM
- Spray polyurethane foam
- Smooth built-up roofing
- Concrete
- Surface Preparation
Remove loose debris before application. Test on a small area before full use to ensure compatibility with the substrate.
- Mixing/Thinning
This product is ready to use and does not require mixing or thinning.
- Application Methods
Apply using a pump sprayer, mop, brush, or sponge, depending on the surface and level of contamination.
- Dwell Time/Rinsing
Allow the cleaner to sit on the surface for 5–10 minutes to break down contaminants. Do not allow it to dry on the surface. Rinse thoroughly with water before proceeding with primer or coating application.
- Limitations/Precautions
Do not apply to hot surfaces or in direct sunlight. Avoid contact with glass, aluminum, or other sensitive materials that may be affected by the cleaner. Ensure proper ventilation when applying in enclosed spaces.
- Storage/Handling
Store in a cool, dry place, away from freezing temperatures. Keep containers sealed to prevent contamination.
- Cleanup/Disposal
Rinse application tools with water after use. Dispose of per local, state, and federal regulations—do not pour into drains or waterways.
